Bez kategorii

Is IPPC Marking Required for Wooden Crates?

Is IPPC Marking Required for Wooden Crates?

Last updated 7 November 2026 · Reviewed by the Guangzhou City Hengming Auto Parts Co., Ltd. fitment team · Reading time 4 minutes

Yes, for solid wood used as export packaging under the ISPM 15 standard. Solid-wood crates, wooden pallets, dunnage, skids and loose timber must carry an IPPC treatment mark after heat treatment (HT) or fumigation (MB), because untreated wood can carry plant pests across borders. Engineered wood such as plywood, blockboard, MDF and particle board is exempt because the manufacturing process kills pests. In strict destination markets, unmarked solid-wood packing can be forced into re-treatment at the consignee’s cost, rejected, or re-shipped; cartons and foam have no ISPM 15 requirement. When you quote crating, ask specifically whether the wood carries a valid IPPC mark.

Which packing needs the mark, which does not

Packing material IPPC / ISPM 15 mark required? Note
Solid-wood crate or box Tak Must show HT or MB mark with treatment code
Wooden pallet, skid, dunnage Tak Used to support or block the cargo
Plywood, blockboard, OSB Nie Bonded engineered wood, exempt
MDF / particle board panels Nie Exempt engineered panel
Five-layer carton + foam corner Nie Paper packing, no ISPM 15 rule
Plastic crate or plastic pallet Nie No plant material

What a valid IPPC mark contains

  • The IPPC plant-pest-protection emblem.
  • Two-letter country code of the treating country.
  • A unique treatment provider or plant-health authority number.
  • Treatment method: HT for heat treatment or MB for methyl bromide fumigation.
  • Marking must be stamped or burned on two visible sides, clear and durable; hand-written or paper labels pasted on are not accepted.

Why buyers should ask before quoting crates

A cheap wooden crate without the mark can create a bigger cost at destination than the crate itself: mandatory re-fumigation, quarantine storage, or refusal of entry. For most exterior parts we use reinforced five-layer cartons with foam lining and corner protectors; fragile items such as FRP wide-body kits and glass headlights can be crated, and any solid-wood crating should be ISPM 15 compliant. Ask for the mark photo on the packing list, and use engineered wood where the consignee accepts it.

Najczęściej zadawane pytania

Do cartons need an IPPC mark?

No. Paper cartons, foam bags and plastic wrap are not wood packaging; ISPM 15 applies to solid wood only.

Is plywood exempt from ISPM 15?

Yes. Plywood, blockboard and other glued engineered panels are exempt because heat and pressure in production eliminate the pest risk.

What if my wooden crate has no IPPC stamp?

Treat it as a clearance risk: some destinations demand re-treatment or reject the wood packaging. Ask the supplier for the marked crate before booking; do not rely on a verbal promise of treatment.

Does HT mean the same as MB?

HT is heat treatment, MB is methyl bromide fumigation. Both are accepted under ISPM 15; the mark must show which method was used.

How do I ask the supplier the right question?

Ask: “Is the wooden crating solid wood with a valid IPPC HT/MB mark, or engineered wood, and can you send a photo of the mark?” Record the answer on the PI.

Related buying guides

Dodaj komentarz

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *